A lightweight GUI framework for embedded displays
Design your GUI with a drag & drop builder, then apply the same code to a wide range of displays, libraries and controllers with the cross-platform framework. Open source MIT license grants free commercial usage.
Features
- Pure C library, no dynamic memory allocation
- Widgets:
- text, images, buttons, checkboxes, radio buttons, sliders, custom keypads, listbox, radial controls, scrolling textbox / terminal, graphs, etc. plus extensions and multiple pages.
- Cross-platform GUIslice Builder application to generate layouts
- Platform-independent GUI core currently supports:
- Adafruit-GFX, TFT_eSPI, mcufriend, UTFT, LCDGFX, SDL1.2, SDL2.0
- Devices:
- Raspberry Pi, Arduino, ATmega2560, ESP8266 / NodeMCU, ESP32, M5stack, Teensy 3 / T4, Feather M0 (Cortex-M0), nRF52 (Cortex-M4F), LINUX, Beaglebone Black, STM32, Due, etc.
- Typical displays:
- PiTFT, Adafruit TFT 3.5" / 2.8" / 2.4" / 2.2" / 1.44", FeatherWing TFT, OLED 0.96", mcufriend, BuyDisplay / EastRising 4.3" 5" 7", Waveshare, 4D Cape
- Display drivers include:
- ILI9341, ST7735, SSD1306, HX8347D, HX8357, PCD8544, RA8875, RA8876, ILI9225, ILI9341_t3, ILI9341_due
- Touchscreen control including:
- STMPE610, FT6206, FT5206, XPT2046, 4-wire, tslib, URTouch, Adafruit Seesaw
- IDE Support:
- GUIslice has been tested for use in the Arduino IDE and Platform IO environments, in addition to LINUX make
- Foreign characters / UTF-8 encoding (in SDL mode), anti-aliased fonts (in TFT_eSPI mode)
- Dynamic display rotation
- GPIO / pin / keyboard / Adafruit Seesaw control for non-touchscreen devices
Screenshots
GUIslice Builder
- Includes cross-platform (Windows, LINUX and Mac) desktop application to generate GUIslice layouts
- Please refer to GUIslice Builder wiki for documentation
Disclaimer
The Software is not designed for use in devices or situations where there may be physical injury if the Software has errors.
1.8.11 
